Manual.ly Logo

Bosch DIY EasyDrill 1200 Naudojimo-Instrukcijos

0,0 · 0 Įvertinimai

PDF vadovas · 215 puslapių

Lietuvių

M: OA-GPT-54-NAN
puslapis

/ 215

Loading...
373598f794fee1c172941749f256260fbe1b page 11
English | 17
Operation
Starting Operation
Inserting the battery
Note: The use of batteries unsuitable for your power tool can
lead to malfunctions or damage to the power tool.
Set the rotational direction switch (6) to the middle position
to avoid unintentionally switching it on. Insert the charged
battery (8) into the handle until you feel it engage and it is
flush with the handle.
Setting the rotational direction (see figureC)
The rotational direction switch (6) is used to change the ro-
tational direction of the power tool. However, this is not pos-
sible while the on/off switch (10) is being pressed.
Right rotation: To drill and to drive in screws, press the ro-
tational direction switch (6) through to the left stop.
Left Rotation: To loosen and unscrew screws and nuts,
press the rotational direction switch (6) through to the right
stop.
Setting the Operating Mode
Drilling
EasyDrill 1200:
Set the torque presetting ring(3) to the
"drilling" symbol.
EasyImpact 1200:
Set the operating mode presetting ring(4) to
the "drilling" symbol.
Screwdriving
EasyDrill 1200:
Set the torque presetting ring(3) to the re-
quired torque.
EasyImpact 1200:
Set the operating mode presetting ring(4) to
the "screwdriving" symbol.
Set the torque presetting ring(3) to the re-
quired torque.
Impact drilling
EasyImpact 1200:
Set the operating mode presetting ring(4) to
the "impact drilling" symbol.
Preselecting the Torque
The torque presetting ring (3) can be used to preselect the
required torque in 20 stages. When the correct setting is
used, the application tool will be stopped when the screw is
driven flush into the material or once the set torque has been
reached. In position the overload clutch is deactivated,
e.g. for drilling.
When unscrewing screws, you can select a higher setting or
set the tool to the symbol.
Adjusting the Speed
You can adjust the speed of the power tool when it is on by
pressing in the on/off switch (10) to varying extents.
A light pressure on the on/off switch (10) results in a low ro-
tational speed. Increased pressure on the switch causes an
increase in speed.
Adjusting the Speed/Impact Rate (EasyImpact1200)
You can adjust the speed/impact rate of the power tool when
it is on by pressing in the on/off switch (10) to varying ex-
tents.
Applying light pressure to the on/off switch (10) results in a
low rotational speed/impact rate. Applying increasing pres-
sure to the switch increases the speed/impact rate.
Mechanical gear selection
u Only operate the gear selector (5) when the power
tool is not in use.
You can preselect two speed ranges with the gear selector
(5).
Gear I:
Low speed range; for screwdriving or working with a large
drilling diameter.
Gear II:
High speed range; for working with a small drilling diameter.
If the gear selector switch (5) cannot be pushed all the way,
turn the tool holder (1) with the application tool slightly.
Switching on/off
To start the power tool, press and hold the on/off switch
(10).
The lamp (11) lights up when the on/off switch (10) is lightly
or fully pressed, meaning that the work area is illuminated in
poor lighting conditions.
To switch off the power tool, release the on/off switch (10).
Fully automatic spindle lock (Auto-Lock)
The drill spindle, and therefore the tool holder(1), are
locked when the on/off switch (10) is not pressed.
This enables screws to be screwed in even when the battery
(8) is empty and allows the power tool to be used as a
screwdriver.
Run-out brake
Upon releasing the on/off switch (10), the drill chuck is
slowed down, which prevents the application tool from con-
tinuing to rotate.
When driving in screws, you should therefore only release
the on/off switch (10) once the screw has been inserted
flush into the workpiece. This way, the head of screw will not
penetrate the workpiece.
Temperature-dependent overload protection
In normal conditions of use, the power tool cannot be over-
loaded. In the event of heaving loading or the temperature
rising/falling outside the permitted battery temperature
range, the speed will be reduced. The power tool will not run
at full speed again until the permitted battery temperature
has been reached.
Bosch Power Tools 1 609 92A 7WD | (20.06.2022)

Kalbėkitės su savo Bosch DIY EasyDrill 1200 instrukcija naudodami AI

Akimirksniu gaukite AI atsakymus iš savo Bosch DIY EasyDrill 1200 instrukcijos

Klauskite bet ko apie Bosch DIY EasyDrill 1200. Atsakymai pateikiami iš šios instrukcijos, nurodant puslapius, kuriais jie remiasi.

EasyDrill 1200 Techninės priežiūros grafikas

Po ilgo lėto darbo
Leisti įrankiui atvėsti

Nuleidus įrankį maksimaliu greičiu be apkrovos apie 3 minutes, jį galima atvėsinti po ilgo darbo esant mažam greičiui.

Rodyti vadove (17 psl.)
Prieš kiekvieną naudojimą arba pagal poreikį
Patikrinti judančias dalis ir būklę

Prieš naudodami įsitikinkite, kad judančios dalys veikia tinkamai be užstrigimų ir nėra sulūžusių ar pažeistų dalių.

Rodyti vadove (6 psl.)
Pagal poreikį
Valyti įrankį ir vėdinimo angas

Laikykite elektros įrankį ir vėdinimo angas švarius, kad užtikrintumėte saugų ir efektyvų darbą.

Rodyti vadove (10 psl.)
M: QW-35-FL

Užduokite Klausimą

0/1000

Ar rekomenduojate EasyDrill 1200?

Taip Ne

Dažniausiai užduodami Klausimai

A

Šis bevielė grąžtu vairas skirtas gręžti medį, metalą, keramiką ir plastiką. Jis nėra aprūpintas smūginiu gręžimu plytoms ar akmenims.

Ar ši atsakymas buvo naudingas?

A

Raskite sukimosi krypties jungiklį viršuje ant rankenos. Pastumkite jį visiškai į kairę pagal laikrodžio rodyklę (varžtams varžyti) arba visiškai į dešinę prieš laikrodžio rodyklę (varžtams atlaisvinti).

Ar ši atsakymas buvo naudingas?

A

Taip, pasirenkant tinkamą sukimo momentą ant nustatomojo žiedo. Didesniems varžtams kietose medžiagose rekomenduojama išgręžti pilotinį skylę, kad būtų išvengta skilimo.

Ar ši atsakymas buvo naudingas?

A

Produktas paprastai tiekiamas su iš dalies įkrauta ličio jonų baterija. Prieš pirmąjį naudojimą rekomenduojama ją visiškai įkrauti, kad būtų užtikrintas maksimalus našumas.

Ar ši atsakymas buvo naudingas?

A

Pavarų selectorius leidžia pasirinkti tarp dviejų greičių diapazonų. I pavaros yra skirtos mažam greičiui ir dideliam sukimo momentui, idealiai tinkančioms varžtams varžyti. II pavaros yra skirtos dideliam greičiui, tinkančioms gręžti mažas skyles.

Ar ši atsakymas buvo naudingas?

A

Bosch baterijos paprastai turi specifinę garantijos trukmę. Prašome patikrinti pakuotę arba oficialią svetainę dėl tikslios trukmės, taikomos jūsų regione.

Ar ši atsakymas buvo naudingas?

M: QW-35-FL

Privalumai ir Trūkumai

Privalumai

  • Lengvas ir ergonomiškas dizainas patogiam valdymui
  • Dvigubas greičio dėklas siūlo universalumą gręžimui ir varžtų varžymui
  • Integruotas LED šviesos pagerina matomumą tamsiose erdvėse
  • Be rakto kištukas leidžia greitai ir lengvai keisti antgalius
  • Elektroninė ląstelių apsauga neleidžia giliai iškrauti baterijos
VS

Trūkumai

  • Netinka sunkaus tipo plytų gręžimui be smūginės funkcijos
  • Baterijos talpa gali būti nepakankama labai ilgiems nuolatiniams darbams
  • Sukimo momentų riba gali būti mažesnė nei profesionalios klasės modeliams
M: QW-35-FL

Produktas Specifikacija

Tipas

Sukraikis

M: QW-35-FL

Produktas Aprašymas

Atraskite Bosch DIY EasyDrill 1200 galią

Bosch DIY EasyDrill 1200 bevielė grąžtu vairas yra tikras preciziškos inžinerijos, skirtos namų tobulinimo entuziastams, įrodymas. Šis universalius įrankis derina patikimumą su lengvumu naudoti, todėl jis yra būtinas bet kuriame DIY rinkinyje. Ar montuojate baldus, kabinate lentynas, ar atliekate smulkius remonto darbus namuose, šis grąžtu vairas užtikrina nuoseklų veikimą be laidų vargo.

Jo veikimo esmę sudaro tvirta 12 voltų ličio jonų baterijų sistema. Šis maitinimo šaltinis užtikrina, kad įrankis išliktų lengvas, tačiau pakankamai galingas, kad atliktų įvairius darbus. Ergonomiškas dizainas turi izoliuotą rankeną, kuri gerina vartotojo saugumą ir komfortą dirbant ilgą laiką. Išskirtinė savybė yra integruota PowerLight, apšviečianti darbo vietą tamsiuose kampuose, užtikrindama tikslumą net sunkiomis sąlygomis.

EasyDrill 1200 siūlo dvi greičio nustatymo galimybes, leidžiančias vartotojams pereiti nuo mažo sukimo momento varžtams varžyti iki didelio greičio gręžiant medį, metalą, keramiką ir plastiką. Reguliuojamas sukimo momentų žiedas suteikia 20 skirtingų nustatymų, leisdamas jums tiksliai kontroliuoti, kaip tvirtai varžtas yra įsukamas, taip apsaugant medžiagas nuo pažeidimų arba varžto galvutės nusilaužimo. Be to, be rakto kištukas leidžia greitai ir be įrankių pakeisti antgalius, ženkliai supaprastindamas jūsų darbą.

Saugumas yra svarbiausias šio prietaiso dizaino elementas. Jame yra temperatūriškai priklausoma perkrovos apsauga, kuri automatiškai sumažina greitį, jei variklis perkaista, taip apsaugodama tiek įrankį, tiek vartotoją. Automatinis ašies fiksatorius laiko kištuką nejudant, kai trigeris atleidžiamas, todėl antgalių keitimas yra saugesnis ir lengvesnis. Su šiais protingais funkcijomis Bosch DIY EasyDrill 1200 naudojimo instrukcija vadovauja vartotojus per saugų ir efektyvų veikimą kiekvieną kartą.

Svarbios pastabos

  • Visada nuimkite bateriją prieš keisdami priedus.
  • Gręždami dėvėkite tinkamą akių apsaugą.
  • Įsitikinkite, kad darbinė dalis yra tvirtai prispausta prieš pradedant.
  • Naudokite tik rekomenduojamus krutuvus optimaliam baterijos gyvimui.

Privalumai

  • Lengvas ir ergonomiškas dizainas patogiam valdymui.
  • Dvigubas greičio dėklas siūlo universalumą gręžimui ir varžtų varžymui.
  • Integruotas LED šviesos pagerina matomumą tamsiose erdvėse.
  • Be rakto kištukas leidžia greitai ir lengvai keisti antgalius.
  • Elektroninė ląstelių apsauga neleidžia giliai iškrauti baterijos.

Trūkumai

  • Netinka sunkaus tipo plytų gręžimui be smūginės funkcijos.
  • Baterijos talpa gali būti nepakankama labai ilgiems nuolatiniams darbams.
  • Sukimo momentų riba gali būti mažesnė nei profesionalios klasės modeliams.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly